Create Usb El Capitan Installer

17-11-2021
 |  [RAND-100] - Comments

*Quick note from Save Apple Dollars - Older OS X Images can now be downloaded directly from Apple at https://support.apple.com/en-us/HT211683 please right click on the image link and select “save as”.

  1. Create El Capitan Usb Installer
  2. Create El Capitan Usb Installer
  3. Make El Capitan Install Usb
  4. Create El Capitan Usb Bootable Installer From Catalina
  5. Create El Capitan Usb Installer From Windows
  • Ark dinos that can dmg metal. Now choose the USB Thumb drive you want to create bootable and click Continue. At this point, select the OS installation ( El Capitan) and click Continue. Now select the bootloader configuration UEFI Boot Mode then click Continue.
  • What you need to create a bootable installer Os X El Capitan Bootable Usb Installer. A USB flash drive or other secondary volume formatted as Mac OS Extended, with at least 14GB of available storage; A downloaded installer for macOS Big Sur, Catalina, Mojave, High Sierra, or El Capitan; Download macOS.

By Roman Loyola at www.macworld.com

I used El Capitan 11.6 image and Transcend USB 3.0. Faiz Orz October 14, 2016 at 10:07 PM. Try to boot with the USB Installer and before that apply this recommended settings. If again you are unable to Boot into USB installer then Create a Bootable Installer again with a different USB drive. Or you can also try the UBibeast way also. Here's how you can create a Mac OS X El Capitan bootable USB flash drive. OS X El Capitan is finally here, and if you're looking to install Apple's new desktop OS fresh from the ground up, then. How to create an El Capitan USB install disk. Step 1: Download El Capitan from the Mac App Store. If you’re a developer, you can redeem a download code to use via the Apple developer center. If you’re a part of Apple’s public beta program, you can likewise redeem a code for the El Capitan GM via Apple’s beta website. Once El Capitan is.

Senior Editor, Macworld | JUL 3, 2017 1:32 PM PDT

Create

Apple uses its App Store to distribute its software, like new Mac operating systems. It’s convenient, but sometimes it can take a while for a download to finish. And if you have multiple Macs, it’s inefficient to download the new OS to each and every Mac.

That’s why I like to make a bootable external drive for the sole purpose of installing the Mac operating system. When I need to tend to a bunch of Macs, it’s much faster to use a bootable drive instead of going to each Mac, launching the App Store, searching for the operating system, downloading it (after entering my Apple ID), and then running the installer.

You can create a bootable USB flash drive with the macOS Sierra installer that’s now available. The installer software will take up nearly 5GB of storage space. Here’s how to create a bootable macOS Sierra installer drive.

Macworld also has bootable-install-drive instructions for:

Lion (OS X 10.7)

Download the macOS Sierra installer

Launch the App Store app, then look for macOS Sierra in the store. (Here’s a link.) Click on the Download button, and your Mac will download the installer to your Applications folder. If it automatically launches after download, quit the installer.

Keep the installer in the Applications folder.

If you’ve already upgraded your Mac to Sierra, the installer is removed from the Applications folder. You can download it again if you go to Purchased in the App Store. Look for macOS Sierra in the list of apps that you’ve bought, and click on the Download button. If it automatically launches after download, quit the installer.

Usb

Get an external drive

You can use a USB flash drive or a hard drive with room for the installer software. I’ve used different drives with success, including a VisionTek 120GB USB 3.0 Pocket Solid State Drive ($83 on Amazon) and an old 8GB Iomega Micro Mini Hard Drive.

Don’t worry if the drive isn’t formatted for the Mac. The drive will be reformatted automatically as part of the process. Change the name of your drive to Untitled; you need to do this for the steps below.

Create bootable installer usb for el capitan

The quick and easy way

The process detailed below involves the Terminal. If your really don’t want to use Terminal, there are a couple of free apps you can use.

  • Install Disk Creator is a straightforward way to create a boot disk. I was able to make a macOS Sierra external USB boot disk in a few minutes, and the installation worked without a hitch. Also works with older versions of OS X.

  • Diskmaker X is a popular app. It also supports older versions of OS X.

Use the Terminal to create a boot disk

Create Usb El Capitan Installer

So you have your external drive, and the Sierra beta installer is in place. Now you’re going to use Terminal to create a boot drive. If you’ve never used Terminal before, don’t worry. This is pretty easy.

Make

Here are the steps to create a macOS Sierra beta boot disk. (Apple also has these instructions.)

  1. Connect the external drive to your Mac. (In the Terminal command you will use, I use Untitled to represent your external drive. If your drive is named something else, you need to change Untitled to the name of your drive.)

  2. Launch Terminal (/Applications/Utilities/Terminal.app).

  3. Copy the following:
    sudo /Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install macOS Sierra.app

  4. Go back to Terminal and paste the copied code at the prompt.

  5. Terminal will ask for a password. This is your user password. Terminal doesn’t display characters when you type it in. Hit Return.

  6. Terminal will tell you that it will erase your drive. To confirm that you want to continue, type Y and hit Return.

  7. You’ll see that Terminal erases your drive. When that part is done, your Mac may ask you if you want to use the drive for Time Machine. Click Don’t Use.

  8. Terminal will copy the installer file to your drive. This will take a few minutes.

  9. After copying, Terminal is done. You should see Terminal display a “Copy complete” and Done notice. You can quit Terminal and your drive is ready for use.

How to boot from the installer drive

  1. Plug your external drive into your Mac.

  2. Power up (or restart) your Mac. Press down on the Option key while the Mac boots.

  3. After a few moments, your Mac should display the Startup Manager, which will show you the available boot drives. Click on the external drive and hit Return. (You don’t need to select a network to proceed.)

  4. Your Mac will display an OS X Utilites window. If you want to install Sierra and leave the data intact, select Install OS X. If you want to start over and wipe out the data, you need to go into Disk Utility to reformat the internal drive first, and then install macOS Sierra.

Full Credit for this article is given to Roman Loyola and www.macworld.com please visit their website for more helpful information about fixing Macs.


These advanced steps are primarily for system administrators and others who are familiar with the command line. You don't need a bootable installer to upgrade macOS or reinstall macOS, but it can be useful when you want to install on multiple computers without downloading the installer each time.

Create El Capitan Usb Installer

What you need to create a bootable installer

  • A USB flash drive or other secondary volume formatted as Mac OS Extended, with at least 14 GB of available storage
  • A downloaded installer for macOS Big Sur, Catalina, Mojave, High Sierra or El Capitan

Download macOS

  • Download: macOS Big Sur, macOS Catalina, macOS Mojave or macOS High Sierra
    These will be downloaded to your Applications folder as an app named Install macOS [version name]. If the installer opens after downloading, quit it without continuing installation. To get the correct installer, download from a Mac that is using macOS Sierra 10.12.5 or later, or El Capitan 10.11.6. Enterprise administrators, please download from Apple, not a locally hosted software-update server.
  • Download: OS X El Capitan
    This will be downloaded as a disk image named InstallMacOSX.dmg. On a Mac that is compatible with El Capitan, open the disk image and run the installer within, named InstallMacOSX.pkg. It will install an app named Install OS X El Capitan into your Applications folder. You will create the bootable installer from this app, not from the disk image or .pkg installer.

Use the 'createinstallmedia' command in Terminal

  1. Connect the USB flash drive or other volume that you're using for the bootable installer.
  2. Open Terminal, which is in the Utilities folder of your Applications folder.
  3. Type or paste one of the following commands in Terminal. These assume that the installer is in your Applications folder and MyVolume is the name of the USB flash drive or other volume you're using. If it has a different name, replace MyVolume in these commands with the name of your volume.

Big Sur:*

Catalina:*

Create El Capitan Usb Installer

Mojave:*

High Sierra:*

El Capitan:

* If your Mac is using macOS Sierra or earlier, include the --applicationpath argument and installer path, similar to the way this is done in the command for El Capitan.


After typing the command:

Make El Capitan Install Usb

  1. Press Return to enter the command.
  2. When prompted, type your administrator password and press Return again. Terminal doesn't show any characters as you type your password.
  3. When prompted, type Y to confirm that you want to erase the volume, then press Return. Terminal shows the progress as the volume is erased.
  4. After the volume has been erased, you may see an alert stating that Terminal would like to access files on a removable volume. Click OK to allow the copy to proceed.
  5. When Terminal says that it's been completed, the volume will have the same name as the installer you downloaded, such as Install macOS Big Sur. You can now quit Terminal and eject the volume.

Use the bootable installer

Determine whether you're using a Mac with Apple silicon, then follow the appropriate steps:

Apple silicon

  1. Plug the bootable installer into a Mac that is connected to the internet and compatible with the version of macOS you're installing.
  2. Turn on your Mac and continue to hold the power button until you see the startup options window, which shows your bootable volumes.
  3. Select the volume containing the bootable installer, then click Continue.
  4. When the macOS installer opens, follow the onscreen instructions.

Intel processor

  1. Plug the bootable installer into a Mac that is connected to the internet and compatible with the version of macOS you're installing.
  2. Press and hold the Option (Alt) ⌥ key immediately after turning on or restarting your Mac.
  3. Release the Option key when you see a dark screen showing your bootable volumes.
  4. Select the volume containing the bootable installer. Then click the up arrow or press Return.
    If you can't start up from the bootable installer, make sure the External Boot setting in Startup Security Utility is set to allow booting from external media.
  5. Choose your language, if prompted.
  6. Select Install macOS (or Install OS X) from the Utilities window, then click Continue and follow the onscreen instructions.

Create El Capitan Usb Bootable Installer From Catalina

Learn more

A bootable installer doesn't download macOS from the internet, but it does require an internet connection to get firmware and other information specific to the Mac model.

Create El Capitan Usb Installer From Windows

For information about the createinstallmedia command and the arguments you can use with it, make sure the macOS installer is in your Applications folder, then enter the appropriate path in Terminal: